GWR 517 Class
I have at last made a start on those draws of flat packs that every modeller has! Quite a few years ago I bought a 3mm Society kit for a GWR 517 Class 0-4-2T. The kit is a Malcom Mitchell kit which has been reduced to 3mm scale. I have looked at with all the etches and pages of instruction many times and tended just to put it back in the box!! With the need for an early GWR tank loco I decided I had to take the plunge.
Actually the kit is beautifully designed and all the parts fit together with very little if any fettling. However with all the tiny parts supplied as well as having to laminate two or three layers at times this is not a kit for the faint hearted.
As can be seen from the photos I have assembled the chassis with society Finescale…
View original post 65 more words